We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22599

8.1i ISE / CORE Generator - Project -> New Source... -> IP (COREGen and Architecture Wizard) customization GUI cannot be canceled on Solaris and Linux


Keywords: cancel, exit, quit, generate, generation, finish, customize

The generation of an IP core cannot be canceled if the following conditions are met:
- The IP core customization GUI has been opened through the Project Navigator Project -> New Source... option.
- The operating system is a Solaris or Linux Platform.
- The IP core selected is a newer core or version introduced within the last two years (there is a "Finish" button instead of a "Generate" button).

Selecting Cancel or closing the Customization GUI generates the core with the parameter values indicated. If an illegal parameter value is listed, the default value for that parameter is used.


If you open a customization GUI under the conditions mentioned above and decide not to generate the selected core, you can perform one of the following:
- Change the parameter values to the lowest setting so the core generates quickly.
- Close the IP core customization GUI and then stop the resulting Java process that is invoked.

This problem is fixed in IP Update #1 for ISE 8.1i ( IP1_I).
AR# 22599
Date 03/04/2008
Status Archive
Type General Article
Page Bookmarked