We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 22943

8.1i iMPACT - MCS programming in iMPACT fails when Design Revisioning is enabled


Programming a PROM file with Design Revisioning enabled fails with iMPACT 8.1 with the following error message:

ERROR:iMPACT - The operation did not complete successfully.

PROGRESS_END - End Operation.

Elapsed time = 127 sec.


The problem is because when iMPACT initially operates on the PROMs the default options must be used. When first using iMPACT to program a PROM, the software must be used without the Advanced Properties. Program the PROM with the default options first to initialize the software. After this first programing, the software will not be able to use the Advanced Properties on the PROMs.

This will be fixed in the 8.2i release of the Design Environment Tools.

AR# 22943
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked