We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23074

8.1i ISE - No IP cores appear in the New Source Wizard - IP selection window when creating a new Project Navigator project


Keywords: Qpro, military, high, rel, reliability, automotive, Rad, Rad-hard, tolerant

No IP cores appear in the "New Source Wizard- Select IP" window if:

1. The New Project Wizard is used to create a new project, and
2. The Device family selected is a Qpro or Automotive variant , and
3. New Source -> IP (Coregen -> Architecture Wizard) is used as part of the New project creation.


When the sequence described above is used to create a new IP source file, Project Navigator sends the wrong derivation of the Device Family name for Automotive and Qpro families.

To work around this problem, create the Project Navigator project, then use the Project -> New Source option to create the IP core.

This issue has been fixed in the latest 8.1i Service Pack available at:
The first service pack containing the fix is 8.1i Service Pack 3.
AR# 23074
Date 03/26/2008
Status Archive
Type General Article
Page Bookmarked