UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23617

MPMC2 GUI - In a Linux environment the MPMC2 IP Configurator's fonts are too big

Description


MPMC2 IP Configurator versions: v1.6, v1.7 and v1.8



When I use the MPMC2 GUI in a Linux environment, the font size can appear too large to fit on the buttons and in the address fields.

Solution


This issue has been seen under some windows managers, and it is caused by a QT default font which is not Sans Serif.



From a command prompt, execute the "qtconfig" utility - available in the "$xilinx/bin/lin" directory. Select the Fonts tab, and change the default font to "Sans Serif" size 10. When closing the configuration window, select "yes" to save the changes. When the MPMC2 GUI is next launched, the correct font shall be used.
AR# 23617
Date Created 09/04/2007
Last Updated 11/12/2010
Status Archive
Type General Article