We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23646

8.1 AccelDSP Synthesis Tool - Divide by Zero Warning During Verify -floatingpoint


When running a Floating Point Verification (Verify -floatingpoint) on the AccelWare "rdivide" Block, the following MATLAB message occurs: 

"Warning: Divide by zero"


This warning message is not a problem because it is not associated with the synthesizable portion of the "rdivide" block (rdivied_001.m) but with the script file that tests the behavior of the "rdivide" (rdivide_001_script.m). In that script file, we calculate the ideal results via the statement: 


referenceIdeal = A./B; 


where 'A' and 'B' are the inputs to "rdivide". The results from "rdivide" are compared against the "referenceIdeal". The warning message happens when a zero value exists in 'B'.

AR# 23646
Date 05/20/2014
Status Archive
Type General Article