AR# 2374: Timing error reported for both flop and RAM, but only applies to RAM
AR# 2374
Timing error reported for both flop and RAM, but only applies to RAM
Description
Keywords: RAMS, RAMD, timing, delay
Urgency: Standard
General Description:
When a RAMS/RAMD is packed with a flop, when there are timing errors simulating the RAM there may also be errors reported for the flop that are not valid. This is due to the fact that the flop and the RAM share the same K pin. Delay values for both primitives are annotated to this pin, but only the larger (RAM) values is used.
Solution
Was this Answer Record helpful?
AR# 2374
Date
04/05/2000
Status
Archive
Type
General Article
By using this website, I accept the use of cookies.
Learn more