We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 23938

ML405 Web Server Design - Error message occurs: "eth0: Terminating link monitoring. Waiting for link interrupt."


I am trying to run the Web server demo that is included with the ML405 board. When I run the design, the following error message occurs:

"eth0: Could not read from PHY, error=1003.

eth0: Could not read PHY control register; error 1003

eth0: Terminating link monitoring.

Waiting for link interrupt."


An updated CF image downloadable from the following link should resolve this issue:


The ML405 Known Issues page is available from the following location:


AR# 23938
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked