UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24016

9.1i Partitions/PAR - Place:120 - There were not enough sites to place all selected components

Description

I receive the following error during Place and Route in my design with Partitions:

"Place:120 - There were not enough sites to place all selected components"

How do I work around this?

Solution

If you are not using "map -timing", then you can use "compression" on the Partitions. If you are using "map -timing", then remove one or more Partitions.

AR# 24016
Date Created 09/04/2007
Last Updated 12/15/2012
Status Active
Type General Article