We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24087

8.2i EDK -"FATAL_ERROR:PersonalityModule:baspmpic.c:1092:1.98 - fill_defualts:cannot find a default speed Process will terminate."


When building a project via BSB, a fatal error occurs:

"FATAL_ERROR: "PersonalityModule:baspmpic.c:1092:1.98 - fill_defaults:cannot find a default speed Process will terminate.""


This problem is caused by the ISE version, ISE WebPACK is compatible with EDK; see (Xilinx Answer 22877).

However, you cannot select devices in the EDK project that are not supported in WebPACK; see (Xilinx Answer 23059). The following link provides information on the devices that WebPACK supports:


If the devices are needed, you must install the full version of ISE to resolve this problem.

AR# 24087
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked