UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2418

M1: MAP->"FATAL_ERROR:baste:bastetspec.c:908:1.64 - No pins of NC_SIGNAL ... NC_BEL

Description

Keywords: TPSYNC, TNM, ucf, constraint

Urgency: standard

General Description:

MAP may give the following for a design that has a
TPSYNC orTNM attached to a loadless signal:

FATAL_ERROR:baste:bastetspec.c:908:1.64 - No pins
of NC_SIGNAL $1I1/myblock/n1614 belong to NC_BEL
$1I1/myblock/n1625 Process will terminate. Please
call Xilinx support.

Solution

Look in the .mrp and .bld report to make sure the TPSYNC or TNM
is not attached to a net that is loadless. Be careful when using
wildcards (NET $1I1/mynet* TPSYNC=MYTP1); if the wildcarded
constraint includes dangling nets, you may see this problem.

If this is the problem, refine your constraint so it does not
include any dangling nets.

AR# 2418
Date Created 06/11/1997
Last Updated 04/03/2000
Status Archive
Type General Article