We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 25045

9.1 System Generator for DSP - ERROR: "Accumulator Latency cannot be sete to Zero if Latency Configuration is set to Auto or Latency is different than 0" when my Latency is set to 0?"


When using the DDS v1.1 Compiler block, the following error message appears: 


"The following error occurred with the dds_sin_cos/DDS Compiler v1_1 1 block: 

Accumulator Latency cannot be set to Zero if Latency Configuration 

is set to Auto or Latency is different than 0." 


Even though all of the conditions are satisfied I still receive the error.


This is a known issue with the DDS compiler. To work around this issue, you must either set "Latency Configuration" to Auto or set "Accumulator Latency" to "One Cycle". 


This will be fixed in a future release of System Generator.

AR# 25045
Date 05/21/2014
Status Archive
Type General Article
Page Bookmarked