We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 25046

ML405 - ACE file created for ML405 does not configure the FPGA


When I create an ACE file for ML405 with a working bitstream and ELF, the error LED glows, indicating that the FPGA has not been configured.


This issue can be resolved by adding the following option to <project>\etc\bitgen.ut

-g Match_cycle:NoWait

AR# 25046
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked