UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 25267

9.1i sp2 EDK, BSB - "FATAL_ERROR: PersonalityModule:baspmpic.c:1241:1.103 - fill__defaults: cannot find a default speed"

Description

When I start Base System Builder (BSB) for a custom board, the following Windows error message occurs and the application shuts down.

"FATAL_ERROR: PersonalityModule:baspmpic.c:1241:1.103 - fill__defaults: cannot find a default speed Process will terminate..."

Solution

EDK BSB needs to search through all of the speed files before proceeding on a custom board design. Make sure that you have selected all technology files (Spartan, Virtex, Virtex-II Pro, etc.) when installing ISE.

A proper error message will be displayed in EDK 9.2i.

AR# 25267
Date Created 09/04/2007
Last Updated 12/15/2012
Status Active
Type General Article