We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 25372

ISE 9.2i - Generating specific IP cores through Project -> New Source results in error: "ERROR:ProjectMgmt - TOE: ITclInterp::ExecuteCmd gave Tcl result 'invalid command name "::_xmdf::xmdfInit"'


The RocketIO GTP WizardGTP v1.5 and Gigabit Ethernet Mac v8.2 fail when generated in Project Navigator with the following Tcl error: 


"ERROR:ProjectMgmt - TOE: ITclInterp::ExecuteCmd gave Tcl result 'invalid command name "::Rocket_xmdf::xmdfInit"'. 

Tcl_ErrnoId: ENOENT 

Tcl_ErrnoMsg: no such file or directory 

_cmd: ::xilinx::Dpm::dpm_chCreateNewSource $piThisInterface 

errorInfo: invalid command name "::Rocket_xmdf::xmdfInit" 

while executing 

"::${moduleName}_xmdf::xmdfInit aInstance" 

(procedure "::utilities_xmdf::xmdfGetOutputList" line 18) 

invoked from within 

"::utilities_xmdf::xmdfGetOutputList $sModule $sFilesDir _XmdfOutputList" 

(procedure "dpm_coregenGetOutputList" line 19) 

invoked from within 

"dpm_coregenGetOutputList $_CoreModuleName $iProject $sCoreDir _genList" 

(procedure "dpm_coregenCreateCore" line 55) 

invoked from within 

"$_sCreate $_filePath $_iNewSourceComp _OutputFileList" 

(procedure "::xilinx::Dpm::dpm_chCreateNewSource" line 61) 

invoked from within 

"::xilinx::Dpm::dpm_chCreateNewSource $piThisInterface"" 


For the Gigabit Ethernet Mac Core, replace "Rocket" with "Gig_Eth_Mac" in the above error. 

This is not reproducible for CORE Generator in standalone mode.


The general issue causing this error has been fixed in the latest 9.2i Service Pack available at: 


The first service pack containing the fix is 9.2i Service Pack 1. 


There have been a small number of instances of this error reported in ISE 9.2.01i and later when using certain settings of the GTP RocketIO core. 

Specifically, the error was reported using XAUI or SATA default settings.  


To avoid this problem, open CORE Generator standalone to generate the desired core.

AR# 25372
Date 03/05/2015
Status Archive
Type General Article
  • ISE - 9.2i
Page Bookmarked