We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 25512

9.1i EDK- Can I connect interrupt ports to VCC/GND?


When I try to connect the interrupt ports of opb_intc to VCC/GND directly, error messages similar to the following occur: 


"calculated index is out of assign VEC range" 


Can I connect interrupt ports to VCC/GND?


No, you cannot connect interrupt ports to VCC/GND; this function is not supported.

AR# 25512
Date 05/22/2014
Status Archive
Type General Article
Page Bookmarked