UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2891

PAR: Error: rpc server is unavailable

Description

While running the flow engine gui, these error messages show up
after saying Par is done.

Error: rpc server is unavailable
Error: the object invoked has disconnected from it's clients.

Solution

1

The problem is not well understood at this time, but appears to
be due to the design manager losing contact with a process that
it is running.

Workaround: If problem occurs frequently, an alternative is to run
the M1 tools from command line.

2

One possible cause for this error is that the user's PC is configured to use a network card, but is not able to. This could be caused by the network card being removed or installed incorrectly. To solve this, correctly install a network card into the system.

3

Please make sure that you have free disk space available on your hard drive.
Lack of hard drive space is one reason this error has occured.

4

Create a new project in design manager with same files. The old project may have gotten corrupted somehow.
AR# 2891
Date Created 08/31/2007
Last Updated 10/20/2008
Status Archive
Type General Article