UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29185

9.2i IP Update 2 - Release Notes and Known Issues for CORE Generator ISE 9.2 IP Update 2 (9.2i_IP2)

Description

This Answer Record contains Release Notes for ISE 9.2i IP Update 2 (also known as 9.2i_IP2) and includes the following:

  • Installation Instructions
  • IP-Related Known Issues
  • CORE Generator Known Issues
  • Previous Release Notes

Solution


Installation

To use this IP Update, first ensure that you have installed ISE 9.2i with Service Pack 2 (ISE 9.2.02i). Service Packs can be downloaded from the following page:
http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp

Install the IP Update using one of the following methods:

Method 1: Automated Update using the Web Installer
  1. Start the CORE Generator Web Installer (from the CORE Generator main GUI, select Tools -> Software Update...).
    If you are prompted for a proxy host, contact your administrator to determine the proxy host address and port number that you should be using to get through your firewall.
  2. Select "ISE 9.2i IP Update 1" from the list of updates in the Available Packages panel.
    If you are prompted to enter a login name and password, use the Xilinx login and password that you normally use to download IP Updates and Service Packs.
  3. Click "Ok" to initiate a download of the update
    After the update is downloaded, the Updates Installer displays a dialog box indicating that it is terminating the CORE Generator session and installing the downloaded archive. Another dialog box will indicate when the update installation is complete; you can then restart CORE Generator.
  4. To confirm that you have installed the update properly, select Help -> About.

Method 2: Manual Installation

Use this method if you are behind a firewall and do not know your proxy settings:
  1. Close the CORE Generator application, if it is running.
  2. Download the ".zip" file from the following location and save it to a temporary directory:
    http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp

    NOTE: Before you can access this page and the files listed on it, you must be registered for CORE Generator IP Updates access.
  3. Extract the ".zip" file (ise_92i_ip_update2_install.zip) archive to a temporary location.
  4. In the root level of the unarchived directory structure, run the setup(.exe) executable to install the update.

    PC
    Unzip the ".zip" file using WinZip 7.0 SR-1 or later.
    NOTE: When extracting the files using WinZip, you have to check the Use Folder Names option.

    UNIX
    Use unzip to unpack the ".zip" file.

    NOTE: You might need system administrator privileges to install the update.
  5. Restart CORE Generator. CORE Generator automatically detects and displays the newly installed IP cores.
  6. Determine whether the installation was successful by verifying that the new cores are visible in the CORE Generator GUI.

Release Notes and Known Issues for IP Included in IP Update Release

(Xilinx Answer 29390) Virtex-5 RocketIO GTP Wizard v1.7
(Xilinx Answer 25437) Virtex-4 FX RocketIO Wizard v1.5
(Xilinx Answer 29368) Virtex-5 GTP Aurora v2.8
(Xilinx Answer 29312) MIG v2.0
(Xilinx Answer 29247) LogiCORE Block Memory Generator v2.6
(Xilinx Answer 29246) LogiCORE FIFO Generator v4.2
(Xilinx Answer 25462) LogiCORE RapidIO v4.2
(Xilinx Answer 29468) LogiCORE Endpoint Block Plus for PCI Express v1.5
(Xilinx Answer 29469) LogiCORE Endpoint for PCI Express v3.6
(Xilinx Answer 29470) LogiCORE Endpoint Block for PCI Express v16
(Xilinx Answer 29471) LogiCORE PCI v3.164
(Xilinx Answer 29472) LogiCORE PCI v4.5 (Virtex-5)
(Xilinx Answer 29473) LogiCORE PCI-X v5.164
(Xilinx Answer 29474) LogiCORE PCI-X v6.5 (Virtex-5)
(Xilinx Answer 29475) LogiCORE PCI/PCI-X UCF Generator v2.5
(Xilinx Answer 29299) Release Notes and Known Issues for all DSP products:
  • CIC Compiler v1.0
  • Fast Fourier Transform (FFT) v5.0
  • FIR Compiler v3.2
  • WiMAX CTC Decoder v3.0
  • Viterbi Decoder v6.2

Previous IP Update Known Issues and Release Notes

(Xilinx Answer 25222) 9.2i IP Update #1 - Release Notes and Known Issues for CORE Generator ISE 9.2 IP Update 1 (9.2i_IP1)
(Xilinx Answer 24847) 9.1i IP Update #3 - Release Notes and Known Issues for CORE Generator ISE 9.1 IP Update 3 (9.1i_IP3)
(Xilinx Answer 24628) 9.1i IP Update #2 - Release Notes and Known Issues for CORE Generator ISE 9.1 IP Update 2 (9.1i_IP2)
(Xilinx Answer 24307) 9.1i IP Update #1 - Release Notes and Known Issues for CORE Generator ISE 9.1 IP Update 1 (9.1i_IP1)
(Xilinx Answer 24226) 8.2i IP Update #3 - Release Notes and Known Issues for CORE Generator ISE 8.2i IP Update 3 (8.2i_IP3)
(Xilinx Answer 24008) 8.2i IP Update 2 LXT Supplement - Release Notes and Known Issues for CORE Generator ISE 8.2i IP Update 2 LXT Supplement (8.2i_IP2_LXTsup)
(Xilinx Answer 23831) 8.2i IP Update #2 - Release Notes and Known Issues for CORE Generator ISE 8.2i IP Update 2 (8.2i_IP2)
(Xilinx Answer 23479) 8.2i IP Update #1 CORE Generator - Release Notes and Known Issues for CORE Generator ISE 8.2i IP Update 1 (8.2i_IP1)
(Xilinx Answer 22155) 8.1i IP Update #1 CORE Generator - Release Notes and Known Issues for CORE Generator ISE 8.1i IP Update 1 (IP1_I)
(Xilinx Answer 21938) 7.1i IP Update #3 CORE Generator - Release Notes and Known Issues for CORE Generator ISE 7.1i IP Update 3 (IP3_H)
(Xilinx Answer 21737) 7.1i IP Update #2 CORE Generator - Release Notes and Known Issues for CORE Generator ISE 7.1i IP Update 2 (IP2_H)
AR# 29185
Date Created 10/28/2007
Last Updated 07/28/2010
Status Archive
Type General Article