We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29298

9.2i iMPACT - Direct SPI programming of a AT45DB device results in "INFO:iMPACT - '1': Sector 'x' is protected"


9.2i iMPACT Direct SPI programming fails with a sector protect error for AT45DB rev "B" and "C" revisions:

"INFO:iMPACT - '1': Sector '0' is protected."

"INFO:iMPACT - '1': Sector '1' is protected."


In 9.2i, sector protect checking works on the "D" revisions for the AT45DB, but not for the "B" and "C" revisions, this is due to differences in the devices.

This issue will be resolved in ISE 9.2.03.

AR# 29298
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked