UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29752

XPower 9.1i - "ERROR:Power:5 - XML exception - line 137:Attribute 'Stepping' is not declared for element 'Document'"

Description

When using XPower on my CoolRunner-II design, the following error occurs when loading the design:

"ERROR:Power:5 - XML exception - line 137:Attribute 'Stepping' is not declared for element 'Document'"

This error occurs in ISE and in stand-alone mode.

Solution

This issue has been fixed in the ISE Design Suite 10.1, which is scheduled for release in March 2008.

To work around this issue before the 10.1 release, follow these steps:

1. Open the .cxt file.

2. At the bottom of the page, edit the following:

Stepping="0" Version="3"

to this:

Version="2"

3. Save and load the design in XPower.

AR# 29752
Date Created 01/18/2008
Last Updated 12/15/2012
Status Active
Type General Article