UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29908

ChipScope Pro 9.2 - Spartan-3A/-3AN/-3A DSP device utilization displayed as "Err" in Inserter

Description

When using ChipScope Inserter on a Spartan-3A, Spartan-3AN, or Spartan-3A DSP, the device utilization portion of the GUI shows "Err" instead of the correct LUTs, BRAM, and FF count. No other selections for Device Family show this problem.

Solution

This is a known issue and is scheduled to be fixed in the 9.2.04 release of the tool. When Service Pack 4 is released, the ChipScope Inserter GUI will display the correct device utilization numbers in the expected location.

AR# 29908
Date Created 12/06/2007
Last Updated 12/15/2012
Status Active
Type General Article