We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30064

10.1 MAP - "FATAL_ERROR:MapLib:basmmtswrap.c:79:1.25- Failed to build TS database: 1 error(s)"


MAP gives the following fatal error message if there is a duplicated entry in the UCF. 


ERROR:TSDatabase:8 - Second spec definition found for TSid "TS_all2macros": 

original definition: TS_all2macros=FROM TNM_ALL TO TNM_MACROS TIG 

new definition: TS_all2macros=FROM:TNM_ALL:TO:TNM_MACROS:TIG 

FATAL_ERROR:MapLib:basmmtswrap.c:79:1.25 - Failed to build TS database: 1error(s). Process will terminate. 


For more information on this error, please consult the Answers Database or open a WebCase with this project attached at: 



To work around this issue, manually remove the duplicate entry in the UCF file. 

This issue has been fixed in ISE 10.1 Service Pack 3.

AR# 30064
Date 01/23/2015
Status Active
Type General Article
  • ISE - 10.1 sp1
  • ISE - 10.1 sp2
Page Bookmarked