UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30159

LogiCORE Accumulator v7.0 - Why is the Accumulator v7.0 no longer available in ISE 10.1? Why do I receive an error indicating that my Accumulator v7.0 cannot be found after updating to ISE 10.1?

Description

Why is my IP no longer available in ISE 10.1? Why do I receive an error indicating that my IP cannot be found after updating to ISE 10.1? After migrating my design from ISE 9.2 to ISE 10.1, I receive an error specifying that my IP can no longer be found. Why do I see this error?

ERROR:sim:160 - Could not find requested IP (Accumulator 7.0) for currently selected part.

ERROR:encore:83 - Error loading C:/my_design/large_design/FPGA/fg676/accum15.xco

Solution

Accumulator 7.0 has been removed in ISE 10.1.

You can find alterative solutions for replacing the Accumulator in (Xilinx Answer 30101).

AR# 30159
Date Created 08/19/2008
Last Updated 12/15/2012
Status Active
Type General Article