UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30294

9.2.01.1028, System Generator for DSP - When I run hardware co-simulation with my RoHS Compliant Virtex-4 XtremeDSP Kit, an error message occurs: "Unable to locate XtremeDSP Kit board using the PCI interface"

Description

When I run hardware co-simulation with my RoHS Compliant Virtex-4 XtremeDSP Kit, the following error message occurs:

"Unable to locate XtremeDSP Kit board using the PCI interface"

Consequently, I cannot run hardware co-simulation with my RoHS compliant version of the Virtex-4 XtremeDSP kit.

Solution

There is a known issue with the new version of the Virtex-4 XtremeDSP kits and PCI hardware co-simulation using System Generator. There was a change made in the hardware of the board that prevents the previous driver configuration from communicating with the board.

This is only a problem with the RoHS compliant version of this board. To identify this board, check if there is a USB connection. The RoHS board does not have a USB connection.

To resolve this issue, install the 9.2.01.1029 patch. For more details and to download this patch see (Xilinx Answer 30130).

AR# 30294
Date Created 02/14/2008
Last Updated 12/15/2012
Status Active
Type General Article