We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30298

10.1 EDK - After running compedklib to create simulation libraries for NCSim, I cannot run simulations


Why can I not run simulations in NCSim, even if I have compiled the ISE and EDK libraries with compedklib?


Compedklib created an invalid "cds.lib" file in the simulation library directory.

1. Open the "cds.lib" file in a text editor.

2. Replace the following line:

INCLUDE "/tools/gensys/ius/6.1/tools/bin/../inca/files/cds.lib"


INCLUDE $CDD_INST_DIR/tools/inca/files/cds.lib

3. Save and Close the "cds.lib" file.

This problem has been fixed in the latest EDK 10.1 Service Pack, available at:

The first service pack containing the fix is EDK 10.1 Service Pack 1.

AR# 30298
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked