UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30307

10.1 iMPACT - Release Notes and Known Issues

Description

The ISE 10.1 Release Notes packaged with your ISE shipment, or found on the Electronic Fulfillment site, contain installation instructions, system requirements, and other general information about ISE 10.1, including iMPACT.

This Known Issues Answer Record is a supplement to the 10.1 Release Notes and contains links to information on known issues in the design tools that might be resolved in service packs or future versions.

For more iMPACT Release Notes and other Configuration Related Articles, see (Xilinx Answer 34104).

Solution

(Xilinx Answer 30128) 10.1 iMPACT - "ERROR:Bitstream:99" occurs when running "Generate Target PROM/ACE File" from ISE

(Xilinx Answer 30222) 10.1 iMPACT - After canceling Programming Options on a clean open of iMPACT, the tool behaves as if I pressed OK

(Xilinx Answer 30184) 10.1 iMPACT - "WARNING:iMPACT:923 - Cannot find cable, check cable setup"

(Xilinx Answer 30217) 10.1 iMPACT/ChipScope/SysGen/XMD - Platform Cable USB cable disconnects with "DeviceDetach: received detach for device handle 0x..." message

(Xilinx Answer 30222) - 10.1 iMPACT - After canceling Programming Options on a clean open of iMPACT, the tool behaves as if I pressed OK

(Xilinx Answer 30399) - 10.1 iMPACT - The message "Readback to file failed" appears when I attempt to readback an XC9572xl CPLD

(Xilinx Answer 30445) - 10.1 iMPACT - There is no option to program my Platform Flash as Configuration Master

(Xilinx Answer 30450) - 10.1 iMPACT - When generating an SVF for an XCFxxP PROM, following message occurs: "The operation did not complete successfully"

(Xilinx Answer 30476) - 10.1 iMPACT - Readback file is incorrect for CoolRunner-II

Issues Addressed in iMPACT 10.1 Service Packs

(SP2) (Xilinx Answer 30476) 10.1 iMPACT - Readback file is incorrect for CoolRunner-II

(SP2) (Xilinx Answer 30914) 10.1 iMPACT - "ERROR:iMPACT:2855 - Add Device failed"

(SP2) (Xilinx Answer 30184) 10.1 iMPACT - "WARNING:iMPACT:923 - Cannot find cable, check cable setup"

(SP2) (Xilinx Answer 30382) Platform Cable USB Install - System exhibits kernel panic when installing cable drivers on Linux

(SP2) (Xilinx Answer 30918) 10.1 iMPACT - Tool reports that "Blank Check" has passed but there is Data in the SPI device

(SP2) (Xilinx Answer 30445) 10.1 iMPACT - There is no option to program my Platform Flash as Configuration Master

(SP2) (Xilinx Answer 30843) 10.1 iMPACT - I see "FATAL_ERROR:GuiUtilities:Gq_Application.c:590:1.20" when attempting to generate an XSVF File

AR# 30307
Date Created 02/21/2008
Last Updated 02/05/2010
Status Active
Type Release Notes