M1.3 Translate: OPTX error:x4kdr: 7 ---netcheck: Macros instantiated in ABEL.
Description
Keyword: M1.3, ABEL, OPTX, x4kdr.
Urgency: Hot
The design can not pass the translate stage due to the OPTX error. The error message is as follow: ERROR: x4kdr: 7 - Netcheck: More than one active source pin was found for signal <signal_name>. Please check to ensure that all signals only have one driver...
Solution
Workaround: This problem may happen if you are using foundation F1.3 and have ABEL macros instantiated in the schematic. The solution to that is resumed in the following steps: Under Design click on IMPLEMENT--->Click on OPTION--->Click on EDIT TEMPLATE--->Under OPTIMIZATION select SPEED or AREA, then click on OK and reimplement. If the instantiated macros were written in VHDL, please look at solution record 2993.
Was this Answer Record helpful?
AR# 3064
Date
04/10/2000
Status
Archive
Type
General Article
By using this website, I accept the use of cookies.
Learn more