UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30711

10.1 EDK - "** Error: (vsim-8346) VHDL component port was not found because Verilog port was mapped to the extended identifier"

Description

When I try to simulate my embedded system with a mpmc, xps_most_nic, or xps_usb2_device core, a VSIM error similar to the following occurs:

" ** Error: (vsim-8346) /tools/EDK/project/ip2/processor/hardware/xps_most_nic/xps_most_nic_v1_

00_a/./hdl/src/vhdl/xps_most_nic.vhd(565): VHDL component port was not found because Verilog port 'SPLB_Rst' was

mapped to the extended identifier '\SPLB_Rst\'.

# Loading mpmc_v4_00_a.mpmc_sample_cycle

# ** Error: (vsim-8346) /tools/EDK/hw/XilinxProcessorIPLib/pcores/mpmc_v4_00_a/hdl/vhdl/mpmc_ctrl_if.vhd(499):

# VHDL component port was not found because Verilog port 'MPMC_Clk' was

# mapped to the extended identifier '\MPMC_Clk\'.

# Region: /system/DDR_SDRAM/DDR_SDRAM/mpmc_ctrl_inst/mpmc_ctrl_if_0/mpmc_ctrl_logic_0"

Solution

This problem has been fixed in the latest EDK 10.1 Service Pack, available at:

http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is EDK 10.1 Service Pack 1.

AR# 30711
Date Created 04/11/2008
Last Updated 12/15/2012
Status Active
Type General Article