UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30852

10.1 ISE - Translate error: "ERROR:ProjectMgmt - TOE: ITclInterp::ExecuteCmd gave Tcl result invalid command name "0"'"

Description


When I run translate on a design that contains package files, the following error occurs:



"ERROR:ProjectMgmt - TOE: ITclInterp::ExecuteCmd gave Tcl result 'invalid command name "0"'.

Tcl_ErrnoId: unknown error

Tcl_ErrnoMsg: No error

_cmd: ::xilinx::Dpm::dpm_chTransformExecuteForNgdbuild dpm_ngdbuildRun $piThisInterface

errorInfo: invalid command name "0"

while executing

"$_iDu GetDesignUnitType _iDuType"

(procedure "dpm_flowGetDesignFiles" line 27)

invoked from within

"dpm_flowGetDesignFiles $basicData(iDesign) $duType hdlFileList designFileList"

(procedure "::xilinx::Dpm::dpm_chTransformExecuteForNgdbuild" line 55)

invoked from within

"::xilinx::Dpm::dpm_chTransformExecuteForNgdbuild dpm_ngdbuildRun $piThisInterface""



How can I resolve this issue?

Solution


This problem has been fixed in the latest 10.1 Service Pack available at:

http://www.xilinx.com/support/download/index.htm


The first service pack containing the fix is 10.1 Service Pack 1.
AR# 30852
Date Created 04/25/2008
Last Updated 07/19/2011
Status Archive
Type General Article