We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30918

10.1 iMPACT - Tool reports that "Blank Check" has passed but there is Data in the SPI device


When I do a Blank Check on an SPI device using the Indirect Programming Flow, iMPACT gives a "Part is Blank" message in the Process Window, even though there is Data in the SPI device.


This is an issue with the pop-up message in the Process Window. The Console and Log file will display the correct message that the "Part is not blank." This issue will be resolved in iMPACT 10.1 Service Pack 2.

AR# 30918
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked