UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30978

10.1 Timing Analyzer - Crashes when trying to perform Analyzed Against User Defined Clock and I/O timing Analysis

Description

KEYWORDS: Timing Analyser, Crash, user, defined, clock, IO, I/O 

 

Timing Analyzer (timingan design.ncd design.pcf), with only the NCD and PCF, crashes when trying to setup Clock and I/O timing Analysis with the following: 

 

"FATAL_ERROR:GuiUtilities:WinApp.c:710$Revision"

Solution

Open the NCD, PCF, and TWX with Timing Analyzer (timingan design.ncd design.pcf and design.twx).  

This will launch Timing Analyzer within Project Navigator.  

Then select Analyze > Against User Specified Paths > by Defining Clock & IO Timing and perform the original analysis.

AR# 30978
Date Created 06/12/2008
Last Updated 05/22/2014
Status Archive
Type General Article