We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31111

10.1 Floorplan Editor - When an existing area group range is adjusted, the associated partition does not go out of date


A design with partitions that have preservation routing is fully implemented, then an area group is created for the partition in Floorplan Editor (FPE). When the UCF is saved, the partitions correctly go out of date. After re-implementing, all partitions are up to date. However, if one then re-adjusts the ranges of the Area Group in FPE, and saves the UCF, the partition does not go out of date.  


What might cause the problem, and when will it be fixed?


This problem has been fixed in the latest 10.1 Service Pack available at: 

The first service pack containing the fix is 10.1 Service Pack 2.

AR# 31111
Date 05/22/2014
Status Archive
Type General Article
Page Bookmarked