AR# 3160

HW130 v4.1.0, 9572: Verify failures on 9572-PC44 devices

Description

During program execution the HW130 software displays the following error message:

Device FAILED to Verify Addr = XXXX Data = XXX

The program finally fails due to a checksum failure.

Solution

There is a bug with v4.1.0 of the hw130 software. The fix is to obtain the latest version from the following location on the Xilinx website:

http://www.xilinx.com/support/troubleshoot/htm_index/sw_programmer.htm

AR# 3160
Date 12/15/2012
Status Active
Type General Article