UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31827

10.1 MAP - MAP fails with error: "DeleteInterpProc called with active evals" during Phase 10.29

Description

When I use the -smartguide option to map a design, MAP fails with the following error in phase 10.29:

Phase 10.29

...........................

.............................................................

DeleteInterpProc called with active evals

This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.

Why is this happening? This does not occur if I do not use the -smartguide option.

Solution

There is a known issue in MAP, where it issues a fatal_error in phase 10.29 when using the -smartguide option.

This is fixed in next major release, ISE 11.1

In the mean time, you can work around the issue by not using the -smartguide option in MAP.

AR# 31827
Date Created 10/20/2008
Last Updated 12/15/2012
Status Active
Type General Article