UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31901

XAPP450 Update - Removal of Sequencing Requirement in Spartan-II and Spartan-IIE

Description

In the Revision History Table of XAPP450, the latest revision notes state that the Spartan-IIE Power Sequencing section was removed. What affect does this have, if any, on existing designs? 

 

XAPP 450: Power-On Requirements for Spartan-II and Spartan-IIE Families (v1.1): 

http://www.xilinx.com/support/documentation/application_notes/xapp450.pdf

Solution

There is no action necessary and no work to be done for existing designs using Spartan-IIE. The removal of this section of the Application Note simply reflects the elimination of the power sequence requirement for Spartan-IIE devices. If your application followed this recommendation, your design will continue to work as expected and no action is necessary.

AR# 31901
Date Created 11/10/2008
Last Updated 05/23/2014
Status Archive
Type General Article