UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31975

10.1 ChipScope - My ATC2 Core cannot be detected

Description

When I connect to a Virtex-5 FXT FPGA with the Agilent Dynamic Probe, the core is not detected. What is the problem? 

 

When I connect to my Virtex-5 device with ChipScope, my ATC2 Core is detected but cannot be accessed. Why?

Solution

To work around this issue, please update your Agilent Dynamic Probe Software to Version 03.70 or higher.  

 

If you are having problems in connecting via the ChipScope Analyzer, then the issue is likely related to using EDK to generate your ATC2 Core. In this situation, extra assistance might be required. If so, please contact Xilinx Technical Support: 

http://www.xilinx.com/support/clearexpress/websupport.htm

AR# 31975
Date Created 12/09/2008
Last Updated 05/21/2014
Status Archive
Type General Article