2. Support
  3. AR# 3217: M1.3/M1.4 MAP - Map crashes due to an illegal pad configuration.
  4. AR# 32175: LogiCORE FlexRay v1.1 - Reading back the default values of the Sync Frame Status Register (SFSR) does not match UG338

AR# 32175

LogiCORE FlexRay v1.1 - Reading back the default values of the Sync Frame Status Register (SFSR) does not match UG338

Description

Reading back the default value of the Sync Frame Status Register (SFSR) does not match the value in the FlexRay v1.1 User Guide (UG338)

Solution

After a reset, reading back the default value of the Sync Frame Status Register (SFSR) does not match that shown in ug338.  

 

The address range for the Sync Frame Status Register (SFSR) in the FlexRay 1.1 User Guide on page 51 is shown as 0x00000340 0x00000378, which is not correct. The correct address range for this register is 0x00000300 0x00000338 as mentioned on page 16 of FlexRay v1.1 data sheet. 

 

This issue will be corrected in the next revision of the FlexRay User Guide (ug338).

AR# 32175
Date 05/23/2014
Status Archive
Type General Article