UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32258

11.1 System Generator for DSP - How can I install just the DSP Tools without reinstalling all of the IDS tools?

Description

Keywords: SysGen, AccelDSP, System Generator for DSP

How can I install just the DSP Tools without reinstalling all of the IDS tools?

Solution

The DSP Tools must be installed from the main IDS installer.

When selecting which tools to install, uncheck "IDS ISE Design Suite" and check only the DSP Tools. On the next page, be sure that only DSP Tools is checked again (and optionally WinPCAP which is required for Ethernet-based Hardware Co-Simulation).

NOTE: The DSP Tools require that the IDS Tools be installed. These instructions only apply to those who wish to later add the DSP Tools after initially installing only the ISE tools.
AR# 32258
Date Created 03/11/2009
Last Updated 09/10/2009
Status Active
Type General Article