My Base System Builder (BSB) design produces the following warning message:
"11.1 EDK - WARNING:EDK:2101 - PORT:Peripheral_Reset CONNECTOR:sys_periph_reset - C:\Data\EDK\bsb_ml507_l27\system.mhs line 462 - floating connection!"
This warning can be safely ignored.
BSB left a connection for non-existent peripherals. The unused connection will be safely trimmed.
This problem has been fixed in EDK 11.3, available at:
| AR# 32265 | |
|---|---|
| Date | 12/15/2012 |
| Status | Active |
| Type | General Article |