We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32516

LogiCORE CPRI v1.2 - Default slave CDC FIFO depth too small


The default slave CDC FIFO depth of 8 is too small for correct operation. This value does not provide the necessary margin for phase drift. The depth should be 16 for correct operation.


This will be fixed in CPRI v2.1, scheduled to be released in 11.1 IP Update 1.

AR# 32516
Date 05/23/2014
Status Archive
Type General Article
Page Bookmarked