We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32523

11.1 Virtex-5 MAP Known Issue - Maximum net name length of 2048 characters is exceeded by Synplicity netlists


The following MAP error occurs when I run a design netlist generated by Synplicity.

"FATAL_ERROR:Utilities:UtilCnameimp.c:425:1.13 - maximum name length exceeded.
Process will terminate. For technical support on this issue, please open a
WebCase with this project attached at http://www.xilinx.com/support."


This is a known problem that occurs when using Synplicity's Certify 9.2 and Synplify Pro 9.6.2. Synplicity has provided a patch to resolve the problem. The 2048 character limit is considered to b a reasonable limit, so no change is scheduled for the Xilinx MAP application.

AR# 32523
Date 01/31/2013
Status Active
Type General Article
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • ISE Design Suite - 11.3
  • More
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • Less
Page Bookmarked