We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32723

11.1 iMPACT - CoolRunner II - Cannot set the security bits


When using iMPACT, If you select Set Programming Properties, you should be able to set the Read Protect under the General CPLD and PROM Properties heading. This is not possible in ISE 11.1


This is a Known issue; the workaround is to use iMPACT 10.1 or use iMPACT 11.1 in batch mode.

AR# 32723
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked