AR# 32817


11.1 ISE - Errors occur when you migrate an ISE project that contains an instantiated EDK project


To resolve this issue, perform the following:

  • Open the ISE project in ISE 11.1 and migrate it if this has not already been done
  • Remove the EDK project (XMP file) from the ISE project
  • Open the XMP file in EDK (Xilinx Platform Studio) standalone and update all the cores using the Wizard
  • Close EDK (Xilinx Platform Studio)
  • Re-add the XMP project file to the ISE project by going to Project -> Add Source...

After you have completed this process, you should be able to use the EDK project within the ISE project as before without any problems.

AR# 32817
Date 02/25/2011
Status Archive
Type General Article
People Also Viewed