UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 3292: Foundation PCM reports JEDEC-to-ABEL conversion failed after normal completion

AR# 3292

Foundation PCM reports JEDEC-to-ABEL conversion failed after normal completion

Description

Keywords: XABEL, ABEL, JEDEC, jed2ahdl, PCM

Urgency: Standard

General Decription:
When running the JEDEC to ABEL converter (part of the XABEL interface) from the PCM,
the PCM log may issue the error "JEDEC to ABEL conversion failed" even though the
conversion completed normally.

Solution

This is most likely due to an erroneous return code from the jed2ahdl program.
If a complete ABEL source file (.ABL) has been generated for the JEDEC module, this
error can be safely ignored.

Note: Jedec to ABEL conversion is only available for a limited set of PAL type devices.
There are no Xilinx tools available to convert CPLD Jedec files the ABEL format.
AR# 3292
Date 03/20/2000
Status Archive
Type General Article

By using this website, I accept the use of cookies.   Learn more

Page Bookmarked