We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32924

MIG v3.1, Spartan-6 FPGA MCB - When controllers C1, C2, and C4 are selected, C4 can only be selected as DDR2 SDRAM


When I generate a multi-controller Spartan-6 FPGA MCB design in MIG 3.1, there is a problem with the GUI that only exists when controllers C1, C2, and C4 are selected. In this case, the C4 controller can only be selected as DDR2 SDRAM.


This is an issue with the GUI. There is no reason that C4 would have to be a DDR2 interface.  


This issue is scheduled to be resolved in MIG v3.2.

AR# 32924
Date 05/21/2014
Status Archive
Type General Article
Page Bookmarked