UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33059

11.2 System Generator for DSP - Why do I receive an error message that an unsupported version of ISE is found, even though I have ISE 11 installed?

Description

Keywords: SysGen, Linux, 11.1, 11.2

When I attempt to generate a design in System Generator for DSP on Linux, the following error occurs:
--------------------------------------------------------------------------------
Summary of Errors:
Error 0001: caught standard exception
Block: Unspecified
--------------------------------------------------------------------------------

Error 0001:

Reported by:
Unspecified

Details:
standard exception: XNetlistEngine:
An exception was raised:
com.xilinx.sysgen.netlist.NetlistInternal: Unsupported version of
ISE:
at
/tools/xilinx/11.1/DSP_Tools/lin64/sysgen/scripts/SgPass2Netlist.pm
line 110

--------------------------------------------------------------------------------

Solution

This error can occur on Linux if your $XILINX variable points to a symbolically linked path.

There is a limitation in xilperl which does not allow the use of symbolic links.
AR# 33059
Date Created 06/26/2009
Last Updated 06/26/2009
Status Active
Type General Article