UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33242

11.2, 11.3 ChipScope Pro Analyzer IBERT - Moving the sampling point slider sets EYE_SCAN_MODE attribute auto to manual

Description

Moving the sampling point slider sets EYE_SCAN_MODE attribute auto to manual scan; the setting then cannot be reset to auto.  

 

How do I maintain auto scan in this situation?

Solution

To work around this issue, you can manually change the EYE_SCAN_MODE attribute in the DRP tab.

AR# 33242
Date Created 08/05/2009
Last Updated 05/23/2014
Status Archive
Type General Article