UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
  1. Xilinx - Adaptable. Intelligent.
  2. Support
  3. AR# 3357: M1.4 Map - Incorrect mapping leads to DRC warning about component pin with no signal attached.

AR# 3357

M1.4 Map - Incorrect mapping leads to DRC warning about component pin with no signal attached.

Description

The incorrect mapping leads to the following valid DRC warning:

WARNING:x4kdr:82 - Blockcheck: The pin "F2" on comp (mapped physical logic cell) "Rx_BE_COND" is configured to be used but has no signal attached to it.

Solution

This problem is corrected in the fourth M1.4 Core Tools patch
available on the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip
AR# 3357
Date 04/03/2000
Status Archive
Type General Article
Page Bookmarked