UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33656

LogiCORE IP Ethernet AVB Endpoint v2.2 - Base Address of AVB software driver not set

Description

The Embedded Development Kit is unable to automatically set the Base Address of the AVB software driver.  

 

This is a result of an error in the software driver support file data/avb_v2_02_a.tcl.

Solution

This can be fixed by editing the file and swapping the string C_BASEADDR for C_MEM0_BASEADDR on lines 53, 54 and 56 of data/avb_v2_02_a.tcl. 

 

This issue has also been resolved in the version 2.2 Rev 1 patch. For the patch and download instructions, see: 

 

(Xilinx Answer 33305) LogiCORE IP Ethernet AVB Endpoint v2.2 - Release Notes and Known Issues for ISE 11.3 software

AR# 33656
Date Created 10/15/2009
Last Updated 05/23/2014
Status Archive
Type General Article