We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33764

LogiCORE IP Initiator, Target v4.11 for PCI - Release Notes and Known Issues for ISE Design Suite 11.4


This Release Notes and Known Issues Answer Record is for the LogiCORE IP Initiator, Target v4.11 for PCI , released in ISE Design Suite 11.4, and contains the following information:

- General Information

- New Features

- Bug Fixes

- Known Issues

For installation instructions, general CORE Generator interface known issues, and design tools requirements, see the IP Release Notes Guide at:



General Information

The LogiCORE IP Initiator Target for PCI v4.11 supports Virtex-5 and Spartan-6 architectures only. For all other devices, use the v3.167 PCI Core. For more information on this core, refer to (Xilinx Answer 32324).

New Features

- ISE Design Suite 11.4 support

Resolved Issues


Known Issues

- Spartan-6 FPGA solutions are pending hardware validation.

- All designs targeting Spartan-6 FPGA must use v4.11 or later version of the core along with ISE Design Suite 11.4 or later. A v4.10 or v4.9 core will not function in hardware regardless of the ISE software version.

Revision History

12/02/2009 - Initial Release

AR# 33764
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked