UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33964

Project Navigator - "Generate Tcl Script" does not list modified properties for Implementation sub-commands

Description

If I change a property of any of the following processes and then generate a Tcl script that only lists the modified properties, the script is empty (the modified properties are not listed for the other two options either).

Generate Post-Translate Simulation Model

Generate Post-Map Static Timing

Generate Post-Map Simulation Model

Generate Post-Place & Route Static Timing

Generate Primetime Netlist

Xpower Analyzer

Generate Power Data

Generate Post-Place & Route Simulation Model

Solution

The "Generate Tcl Script" support was originally designed to support the main implementation flow only.

As such, the generated Tcl script can be used as a starting point for creating a project script but should not be used for revision control purposes where complete project settings are needed.

AR# 33964
Date Created 12/14/2009
Last Updated 12/15/2012
Status Active
Type General Article